








|
Customer's Comments:
Hello,
We have finished our railing project & have started our fence project. Just thought
you might like to have some before and after pictures of the railing project. We
resolved the issue we were having in attaching the railing to our brick steps. We
found that you cannot use concrete anchors when attaching to brick. We drilled
1/2" holes approx. 2-1/2" deep and inserted 5/16" lead anchors which were 2
inches in length. We then attached the support posts using 2 inch lag
screws. This allows us to tighten the post into place without breaking the brick.
We've had a lot of compliments on the railing. As you can see, it is a definite
improvement over the rusty iron railing we had in place previously. We'll send some
pictures of our fencing project after completion.
Thanks,
Karla M.
Hurricane, WV.
Hoover Fence Co. Reply:
Thanks for the pictures Karla. Your railing looks great. We
appreciate your tips on installing post support kits to brick steps. This should help
others with the same problem. Looking forward to seeing pictures of your fence project and
your comments about your experience with Hoover Fence Company. Good luck, call if you need
any help on your installation. Ralph Hoover,
Hoover Fence Co.

Before
|

After
|
(click
images to enlarge)
|
|
|